PhotoFast 2.5" G-Monster V5 MLC SSD 512GB

PhotoFast V5 SATA II MLC SSD is one of the fastest SSD's on the market, with 270MB/s read/write!

x Data transfer speed: 270 MB/s read - 270 MB/s write
x 4k data transfer: 32.20 MB/s (vs. 0.1-0.2 MB/s standard HDD)
x Capacity: 64 GB
x Buffer: 128 MB
x Interface: SATA II
x Dimensions: 2.5 inch (99.88mm x 69.63mm x 9.3mm)

General Description:
PhotoFast G-Monster V5 2.5 SATA II MLC SSD is designed to drive the shift of mobile PC users from the hard disk drive to the solid state drive. A drop-in replacement for the hard disk drive, it delivers far superior durability, performance and power efficiency - keeping mobile PCs working optimally in the toughest of conditions.

This SSD provides fast Read and Write speed and delivers unbeatable durability, system performance and power efficiency.

The G-Monster-V5 Solid State Drive is based on standard Serial ATA interface. This 2.5 inch SSD is provides an excellent solution in a notebook or portable devices as a storage device with a high performance, high reliability, low power consumption and a small form factor.

Key Features

-Hardware ECC and EDC for NAND Flash
-6, 12 bytes/ sector correctable by RS mode: 8, 12, 16 bits/ sector correctable by BCH mode
-Embedded SDRAM buffer size: 64MByte
-Supports 1.5/3.0Gbps SATA I/II interface
-Fully Compliant with Serial ATA International Organization: Serial ATA Revision 2.6
-Fully Compliant with ATA/ATAPI-7 Standard
-Capacities: 64GB/128GB/256GB/512GB (MLC), 32GB/64GB/128GB (SLC)
-Data integrity under power-cycling
-Fully Compliant with RoHS directive
-CE and FCC compatibility


Specifications

Form Factor
W: 100.00mm x D: 70.00mm x H: 9.30mm

Weight
77g~85g

Input Voltage
5V +/- 5%

Power Consumption
Operation: 300mA - 450mA (Typical)
Standby: 3mA - 5mA (Typical)

Connector
SATA

Capacity
64GB, 128GB, 256GB, 512GB

Buffer Size
SDRAM 128MB

Transfer Modes
1.5/3.0Gbps SATA I / II

Support NAND Flash
Both SLC & MLC flash supported (this model is MLC flash - contact us if you require this SSD with SLC flash)

Performance
Read 270MB/s Max. Sequential Read
Write 270MB/s Max. Sequential Write

Environmental
Operating Temperature 0 C to 70 C
Storage Temperature -25 C to 85 C
Humidity 0 C to 55 C / 95% RH, 10cycles

Vibration
Operating 20G Peak
Storage 20G Peak

Shock
Operating 1500G
Storage 1500G

Humidity
Operating Humidity(Non Condensation) 5% to 95%
Storage Humidity(Non Condensation) 5% to 95%

Reliability
S.M.A.R.T Support Yes
Data Retention 10 years
MTBF 1,500,000 Hours

Data Reliability
High reliability based on the internal BCH 15bit ECC (Error Code Correction) technology

Physical Dimensions
2.5inch (99.88mm x 69.63mm x 9.3mm)